Difference: AMC13ProductionTesting (15 vs. 16)

Revision 1609 Apr 2015 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"

New 2014 Production Test

Line: 27 to 27
 
    1. Communications Check and Programming
      1. Connect the JTAG cable and program the initial bit file into the Spartan FPGA (instructions using iMPACT)
      2. Log on to CMS2, calculate the IP address and ensure you can ping the module
Changed:
<
<
      1. Using AMC13Tool, program the flash memory: Header, Golden, Spartan, Kintex
>
>
      1. Using AMC13ToolFlash, program the flash memory: Header, Golden, Spartan, Kintex
 
      1. Select "L" command to reload all from flash, and issue "fv" to check the versions
    1. IP address setting check (MMC software documentations)
      1. Use applyConfig.py to set the IP addresses to a new value and check access
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback