|
META TOPICPARENT |
name="AMC13BoardDatabase" |
Each AMC13 has a hardware serial number determined by solder jumpers on the T2 board
(8 bits). This number determines the MAC address, and is therefore defined as the module
serial number, and should be printed visibly on the front panel and on the T3 board. |
|
> > | Note: The labeling scheme described below was not consistently used for modules produced before 2014, however the serial number setting scheme applies to all AMC13. |
|
|
Serial number setting Example = 2^5 + 2^2 + 2^0 = 35 (click image for larger view) |
Every AMC13 consists of a stack of 3 boards, numbered T1, T2, T3 with T1 being the right-most |
|
|
|
< < |
|
> > |
|
|
|