Difference: AMC13PartNumbers (2 vs. 3)

Revision 329 Oct 2015 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="AMC13BoardDatabase"

Each AMC13 has a hardware serial number determined by solder jumpers on the T2 board

Changed:

<
<

(8 bits). This number determines the MAC address, and is therefore defined as the module serial number, and should be printed visibly on the front panel and on the T3 board.

>
>

(8 bits + 1 secret 9th bit

). This number determines the MAC address, and is therefore defined as the module serial number, and should be printed visibly on the front panel and on the T3 board. See AMC13BoardDatabase page for a list of serial number ranges in use.

Note: The labeling scheme described below was not consistently used for modules produced before 2014, however the serial number setting scheme applies to all AMC13.

View topic | History: r3 < r2 < r1 | More topic actions...