Difference: AMC13OpticalComponents (1 vs. 19)

Revision 1906 Jun 2016 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1-3 different type SFP in the upper 3 sites for DAQ. See sketch below.

Line: 35 to 35

Manufacturer <-- -->	Part No	Price/Availability	Speed	Notes
JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska

Changed:

<
<

Finisar

FTLF1318P3BTL

USD 65 / Stock

Gigabit Ethernet up to 1.25Gb/s

>
>

Finisar

FTLF1318P3BTL

USD 65 / Stock

Gigabit Ethernet up to 1.25Gb/s

1310nm SMF

160Mb/s TTC

Revision 1812 Nov 2015 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1-3 different type SFP in the upper 3 sites for DAQ. See sketch below.

Line: 13 to 13

For the g-2 experiment, 10Gb/s is required. Confused? Me, too!

Added:

>
>

SFP Inventory

10Gb/s DAQ

Revision 1724 Jun 2015 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Changed:

<
<

Optical components used for testing the AMC13.

CDAQ

57D9AMZ from Avago

>
>

The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1-3 different type SFP in the upper 3 sites for DAQ. See sketch below.

The TTC SFP for all new AMC13 should be the 400Mb/s capable type (JDSU or Finisar below). The CMS TCDS protocol now used requires 400Mb/s for the return data sent by the AMC13.

The DAQ SFP currently (as of LHC Run 2 in 2015) run at 5.0Gb/s, but we plan to upgrade to 10Gb/s soon so ideally all AMC13 should have 10Gb/s capable SFP installed.

For the g-2 experiment, 10Gb/s is required. Confused? Me, too!

10Gb/s DAQ

Line: 11 to 21

5Gb/s DAQ

Changed:

<
<

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so).

>
>

57D9AMZ from Avago (CMS CDAQ, only works to 8.2 Gb/s)
HP AJ716A 8Gb Fibre Channel SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so).

These are 850nm MMF Duplex LC connector type.

160/400Mb/s TCDS

Line: 25 to 35

JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska
Finisar	FTLF1318P3BTL	USD 65 / Stock	Gigabit Ethernet up to 1.25Gb/s

Deleted:

<
<

160Mb/s TTC

Added:

>
>

These are obsolete and should only be used for lab testing or loop-back.

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

LFP105 from blackbox.com ($70 each) – Discontinued as of June 2012
HFBR-57E0LZ from Avago (Digi-Key has them).

Revision 1615 Jun 2015 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Added:

>
>

CDAQ

57D9AMZ from Avago

10Gb/s DAQ

Revision 1512 Mar 2015 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 41 to 41

SFP Inventory

Part Number	Description	Number	Location	Notes

Changed:

<
<

HFBR 57E0LZ

TTC

In g-2 lab

tested

>
>

HFBR 57E0LZ

TTC

In g-2 lab

tested

-- EricHazen - 10 Jan 2012 \ No newline at end of file

Revision 1413 Feb 2015 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 41 to 41

SFP Inventory

Part Number	Description	Number	Location	Notes

Changed:

<
<

HFBR 57E0LZ

TTC

In packaging next to cmssun4

new (untested)

>
>

HFBR 57E0LZ

TTC

In g-2 lab

tested

-- EricHazen - 10 Jan 2012 \ No newline at end of file

Revision 1312 May 2014 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 17 to 17

After LS1 CMS will replace TTC hardware with TDCS. This will use TTC protocol for downstream compatible with existing system, but new 400MB/s 8b10b protocol for upstream.

Changed:

<
<

As of this writing we are still selecting a new SFP to use but here are some candidates:

>
>

Either of the following two may be used.

Manufacturer	Part No	Price/Availability	Speed	Notes
JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska
Finisar	FTLF1318P3BTL	USD 65 / Stock	Gigabit Ethernet up to 1.25Gb/s

Changed:

<
<

Finisar

FTLF1321P1BTL

USD 95 / Stock (SK)
USD 65 (Avnet)

Up to 2.67Gb/s

>
>

160Mb/s TTC

Revision 1201 May 2014 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 23 to 23

Manufacturer	Part No	Price/Availability	Speed	Notes
JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska
Finisar	FTLF1318P3BTL	USD 65 / Stock	Gigabit Ethernet up to 1.25Gb/s

Changed:

<
<

Finisar

FTLF1321P1BTL

USD 95 / Stock

Up to 2.67Gb/s

>
>

Finisar

FTLF1321P1BTL

USD 95 / Stock (SK)
USD 65 (Avnet)

Up to 2.67Gb/s

160Mb/s TTC

Revision 1101 May 2014 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 13 to 13

SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so). These are 850nm MMF Duplex LC connector type.

Added:

>
>

160/400Mb/s TCDS

After LS1 CMS will replace TTC hardware with TDCS. This will use TTC protocol for downstream compatible with existing system, but new 400MB/s 8b10b protocol for upstream.

As of this writing we are still selecting a new SFP to use but here are some candidates:

Manufacturer	Part No	Price/Availability	Speed	Notes
JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska
Finisar	FTLF1318P3BTL	USD 65 / Stock	Gigabit Ethernet up to 1.25Gb/s
Finisar	FTLF1321P1BTL	USD 95 / Stock	Up to 2.67Gb/s

160Mb/s TTC

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

Line: 23 to 36

We have shipped several AMC13 with the Black Box ST/LC cable (3m) P/N: EFN110-003M-STLC.

Added:

>
>

NOTE: these are all obsolete with the commissioning of the TCDS system

SFP Inventory

Revision 1013 Feb 2014 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Revision 912 Feb 2014 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 23 to 23

We have shipped several AMC13 with the Black Box ST/LC cable (3m) P/N: EFN110-003M-STLC.

Added:

>
>

SFP Inventory

Part Number	Description	Number	Location	Notes
HFBR 57E0LZ	TTC	14	In packaging next to cmssun4	new (untested)

-- EricHazen - 10 Jan 2012

Revision 812 Feb 2014 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

10Gb/s DAQ

Changed:

<
<

* AFBR-703SDZ

from Avago ($120)

>
>

AFBR-703SDZ from Avago ($120). EOL as of 2/2014
AFBR-709SMZ is a replacement, same price

5Gb/s DAQ

Revision 710 Sep 2013 - DavidZou

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 16 to 16

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

LFP105 from blackbox.com ($70 each) – Discontinued as of June 2012

Changed:

<
<

FBR-57E0LZ from Avago (Digi-Key has them).

>
>

HFBR-57E0LZ from Avago (Digi-Key has them).

Cables are 62.5u multimode ST-LC type

Revision 602 Apr 2013 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 16 to 16

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

LFP105 from blackbox.com ($70 each) – Discontinued as of June 2012

Changed:

<
<

FBR-57E0LZ from Avago (Digi-Key has them). Seems compatible but not tested, ordering 6 pcs 6/26/12

>
>

FBR-57E0LZ from Avago (Digi-Key has them).

Cables are 62.5u multimode ST-LC type

Revision 531 Jan 2013 - CharlieHill

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

10Gb/s DAQ

Changed:

<
<

* [http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=AFBR-703SDZ][AFBR-703SDZ]] from Avago ($120)

>
>

* AFBR-703SDZ

from Avago ($120)

5Gb/s DAQ

Changed:

<
<

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel

>
>

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel

SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so). These are 850nm MMF Duplex LC connector type.

Revision 417 Dec 2012 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Added:

>
>

10Gb/s DAQ

* [http://www.digikey.com/scripts/dksearch/dksus.dll?vendor=0&keywords=AFBR-703SDZ][AFBR-703SDZ]] from Avago ($120)

5Gb/s DAQ

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel

Revision 326 Jun 2012 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Added:

>
>

5Gb/s DAQ

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so). These are 850nm MMF Duplex LC connector type.

Changed:

<
<

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver, i.e. LFP105 from blackbox.com ($70 each), though these seem to be quite a commodity item.

>
>

160Mb/s TTC

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

LFP105 from blackbox.com ($70 each) – Discontinued as of June 2012
FBR-57E0LZ from Avago (Digi-Key has them). Seems compatible but not tested, ordering 6 pcs 6/26/12

Cables are 62.5u multimode ST-LC type

We have shipped several AMC13 with the Black Box ST/LC cable (3m) P/N: EFN110-003M-STLC.

-- EricHazen - 10 Jan 2012 \ No newline at end of file

Revision 214 Mar 2012 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

Line: 7 to 7

These are 850nm MMF Duplex LC connector type.

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver, i.e. LFP105 from blackbox.com ($70 each), though these seem to be quite a commodity item.

Added:

>
>

We have shipped several AMC13 with the Black Box ST/LC cable (3m) P/N: EFN110-003M-STLC.

-- EricHazen - 10 Jan 2012

Revision 110 Jan 2012 - EricHazen

Line: 1 to 1

Added:

>
>

META TOPICPARENT	name="HcalDTC"

Optical components used for testing the AMC13.

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver, i.e. LFP105 from blackbox.com ($70 each), though these seem to be quite a commodity item.

-- EricHazen - 10 Jan 2012

View topic | History: r19 < r18 < r17 < r16 | More topic actions...