Difference: AMC13MmcSoftware (5 vs. 6)

Revision 631 May 2013 - CharlieHill

Line: 1 to 1

META TOPICPARENT	name="HcalDTC"

AMC13 MMC Software

The AMC13 MMC software package can be found in the amc13config directory in the xDAQ release or Standalone Release. This package is a collection of python scripts which provide the ability to store configuration information into non-volatile EEPROM memory for each SPI port, to apply directly configuration information to an AMC13 after power up, and to issue useful commands remotely such as resets and handle swaps.

Line: 14 to 14

backendPower.py

coldReset.py

handleOverride.py

Added:

>
>

mmcVersion.py

systemVars.py

Line: 33 to 34

All flags that are in parentheses are optional and and will take on their default values as listed in systemVars.py if not explicitly specified.

Flag	Description
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`

Changed:

<
<

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be configured. If not specified, defaults to value in systemVars.py

>
>

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be read from. If not specified, defaults to value in systemVars.py

readNVmem.py

Line: 43 to 44

Flag	Description
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`

Changed:

<
<

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be configured. If not specified, defaults to value in systemVars.py

>
>

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be read from. If not specified, defaults to value in systemVars.py

applyConfig.py

Line: 108 to 109

All flags in parentheses are optional and will take on their values as listed in systemVars.py if not explicitly specified.

Flag	Description
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`

Changed:

<
<

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be configured. If not specified, defaults to value in systemVars.py

>
>

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be powered. If not specified, defaults to value in systemVars.py

`--enable`	Turn on the backend power
`-disable`	Turn off the backend power

Line: 121 to 122

All flags in parentheses are optional and will take on their values as listed in systemVars.py if not explicitly specified.

Flag	Description <-- -->
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`

Changed:

<
<

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be configured. If not specified, defaults to value in systemVars.py

>
>

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be reset. If not specified, defaults to value in systemVars.py

handleOverride.py

Line: 132 to 133

All flags in parentheses are optional and will take on their values as listed in systemVars.py if not explicitly specified.

Flag	Description
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`

Changed:

<
<

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be configured. If not specified, defaults to value in systemVars.py

>
>

--slot Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be controlled. If not specified, defaults to value in systemVars.py

`in`	Force handle in
`out`	Force handle out
`cycle`	Force handle out for 10 seconds and then issue a release
`release`	Handle not forced, but instead the actual handle position is payed attention to

Added:

>
>

mmcVersion.py

This script is used to read out the MMC firmware version on a specified AMC13

./mmcVersion.py (--host=<ip_addr>) (--slot=<n>)

Flag	Description
`--host`	Host IP address for your uTCA crate. This should be the IP address of your commercial MCH1 module. If not specified, defaults to value in `systemVars.py`
`--slot`	Slot number (as seen on the uTCA crate, ie one-based) of AMC13 to be read from. If not specified, defaults to value in `systemVars.py`

-- CharlieHill - 08 May 2013

View topic | History: r13 < r12 < r11 < r10 | More topic actions...