Difference: AMC13BoardDatabase (1 vs. 117)

Revision 11703 Nov 2020 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Added:
>
>		Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link
 
Serial Number Range Used Count Board Type/Rev Notes
1-12 12 12 V1 with Virtex-6 LX 130T and Spartan-6  
16-20 5 5 V1 with Virtex-6 LX 240T  
Line: 23 to 25
  See AMC13PartNumbers and barcode labels for details on part numbers and barcode labels.
Changed:
<
<		Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link EDIT link
>
>
  Production I -- 2014

Revision 11618 Nov 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
 
160-254 ? 95 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 95
255-256       Don't use
257-321 65 65 V2 with Kintex-7 LX240T Spartan 6 BU production of 65 in 2015
Added:
>
>
322-383       Reserved for BU
384-511       CERN 2015 Production continued
  Notes:

Revision 11529 Oct 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 10 to 10
 
47 0 1   Unused but see note [1]
48-112 65 65 V2 with Kintex-7, LX 240T Spartan 6 (lx45t) 2014 Production of 65
113-127 and 129-159 0 46   Reserved for future BU production
Changed:
<
<
160-223 ? 64 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 64
224-254 0 31   Reserved S/N
255       Don't use
>
>
160-254 ? 95 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 95
255-256       Don't use
257-321 65 65 V2 with Kintex-7 LX240T Spartan 6 BU production of 65 in 2015
  Notes:

Revision 11419 Jun 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Changed:
<
<
Serial Number Range Board Type/Rev Notes
1-12 V1 with Virtex-6 LX 130T and Spartan-6  
16-20 V1 with Virtex-6 LX 240T  
32-46 V2 with Kintex-7, LX 150T Spartan 6 (lx25t)  
48-112 V2 with Kintex-7, LX 240T Spartan 6 (lx45t) 2014 Production of 65
113-127 and 129-159   Reserved for future BU production
160-223 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 64
224-255   Reserved S/N
>
>
Serial Number Range Used Count Board Type/Rev Notes
1-12 12 12 V1 with Virtex-6 LX 130T and Spartan-6  
16-20 5 5 V1 with Virtex-6 LX 240T  
21-31 0 11   Could be used but see note [1]
32-46 15 15 V2 with Kintex-7, LX 150T Spartan 6 (lx25t)  
47 0 1   Unused but see note [1]
48-112 65 65 V2 with Kintex-7, LX 240T Spartan 6 (lx45t) 2014 Production of 65
113-127 and 129-159 0 46   Reserved for future BU production
160-223 ? 64 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 64
224-254 0 31   Reserved S/N
255       Don't use
 
Changed:
<
<		AMC13PartNumbers and barcode labels
>
>		Notes:

[1] Software expects serial numbers below 48 to use LX150T Spartan chip; to support newer modules in these serial numbers would require updated software.

See AMC13PartNumbers and barcode labels for details on part numbers and barcode labels.

  Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link EDIT link
Line: 85 to 93
 Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.

Inventory of SFPs in BU CMS Lab
Deleted:
<
<		-- EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012
 \ No newline at end of file
Added:
>
>		 -- EricHazen - 19 Jun 2015

Revision 11308 Jun 2015 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Serial Number Range Board Type/Rev Notes
1-12 V1 with Virtex-6 LX 130T and Spartan-6  
16-20 V1 with Virtex-6 LX 240T  
Changed:
<
<
32-46 V2 with Kintex-7, LX 150T Spartan 6  
48-112 V2 with Kintex-7, LX 240T Spartan 6 2014 Production of 65
>
>
32-46 V2 with Kintex-7, LX 150T Spartan 6 (lx25t)  
48-112 V2 with Kintex-7, LX 240T Spartan 6 (lx45t) 2014 Production of 65
 
113-127 and 129-159   Reserved for future BU production
160-223 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 64
224-255   Reserved S/N

Revision 11204 Mar 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 27 to 27
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2014/04/09) Currently out of Commission, T2 removed, replaced w/ 49 T2 (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Disassembled (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU T1 taken to replace in S/N 94 (T2 no longer used)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Line: 43 to 43
 
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    
Added:
>
>		Notes on previous S/N 34:

Disassembled (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)

  Boards with Virtex-6 LX130T

Revision 11103 Feb 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 33 to 33
 
 
37 (0x25) Some HW Problems   T1: 0x1c T2: 0x17 BU, EDF Eric is using as model for placing labels. IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
>
>
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing). Still at BU 2/3/15?  
 
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 

Revision 11006 Jan 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Serial Number Range Board Type/Rev Notes
Changed:
<
<
1-12 V1 with Virtex-6 LX 130T and Spartan-6 (LX 25T firmware)  
>
>
1-12 V1 with Virtex-6 LX 130T and Spartan-6  
 
16-20 V1 with Virtex-6 LX 240T  
Changed:
<
<
32-46 V2 with Kintex-7, LX 150T Spartan 6 (LX 145T firmware)  
48-112 V2 with Kintex-7, LX 240T Spartan 6 (LX 145T firmware) 2014 Production of 65
>
>
32-46 V2 with Kintex-7, LX 150T Spartan 6  
48-112 V2 with Kintex-7, LX 240T Spartan 6 2014 Production of 65
113-127 and 129-159   Reserved for future BU production
160-223 V2 with Kintex-7, LX240T Spartan 6 CERN Production of up to 64
224-255   Reserved S/N
  AMC13PartNumbers and barcode labels

Revision 10906 Jan 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Changed:
<
<
Serial Number Range Board Type/Rev
1-12 V1 with Virtex-6 LX 130T and Spartan-6 (LX 25T firmware)
16-20 V1 with Virtex-6 LX 240T
32-46 V2 with Kintex-7, LX 150T Spartan 6 (LX 145T firmware)
48+ V2 with Kintex-7, LX 240T Spartan 6 (LX 145T firmware)
>
>
Serial Number Range Board Type/Rev Notes
1-12 V1 with Virtex-6 LX 130T and Spartan-6 (LX 25T firmware)  
16-20 V1 with Virtex-6 LX 240T  
32-46 V2 with Kintex-7, LX 150T Spartan 6 (LX 145T firmware)  
48-112 V2 with Kintex-7, LX 240T Spartan 6 (LX 145T firmware) 2014 Production of 65
  AMC13PartNumbers and barcode labels
Changed:
<
<		WARNING: information on new boards (SN48 and larger) is no longer maintain on this page.

Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link EDIT link

>
>		Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link EDIT link
  Production I -- 2014

Revision 10828 Oct 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Serial Number Range Board Type/Rev
Changed:
<
<
1-12 V1 with Virtex-6 LX 130T
>
>
1-12 V1 with Virtex-6 LX 130T and Spartan-6 (LX 25T firmware)
 
16-20 V1 with Virtex-6 LX 240T
Changed:
<
<
32-46 V2 with Kintex-7, Spartan 6 LX 150T
48+ V2 with Kintex-7, Spartan 6 LX 240T
>
>
32-46 V2 with Kintex-7, LX 150T Spartan 6 (LX 145T firmware)
48+ V2 with Kintex-7, LX 240T Spartan 6 (LX 145T firmware)
  AMC13PartNumbers and barcode labels

Revision 10709 Jul 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 19 to 19
 Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
Changed:
<
<
Serial No Location Owner MMC Rev Firmware Rev Notes
48 CERN (Magnus' lab)
49 Cornell t.b.d. 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, RARP tested
54 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
60 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
           
61 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1

Notes:

  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)
  4. Front Panel on, prepping for shipment

>
>		See Database for boards above S/N 48.
  AMC13XG with Kintex-7

Revision 10606 Jun 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 10 to 10
  AMC13PartNumbers and barcode labels
Added:
>
>		WARNING: information on new boards (SN48 and larger) is no longer maintain on this page.

Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link EDIT link

 Production I -- 2014

Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards

Revision 10504 Jun 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 98 to 98
 
16 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12 daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu
17 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
18 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
Changed:
<
<
19 Tested OK S=0x17 V=0x2a BU Retest 8/31/12, productiontest errors 6/18/13  
>
>
19 Tested OK S=0x17 V=0x2a BU T1 has power supply problem (2014/06/04), productiontest errors 6/18/13, Retest 8/31/12  
 
20 Tested OK   BU? Not in CMS Lab    

Two more boards shipped to DESY and Rice in Nov 2012.

Revision 10415 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
>
>
53 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, RARP tested
54 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
Line: 36 to 36
 
63 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
Changed:
<
<
65 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
>
>
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
Changed:
<
<
67 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
>
>
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1

Revision 10314 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 25 to 25
 
53 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
60 BU t.b.d.      
         
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
>
>
56 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
60 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
           
61 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
Changed:
<
<
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
>
>
65 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
Changed:
<
<
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
>
>
67 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1

Revision 10214 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 17 to 17
 

Serial No Location Owner MMC Rev Firmware Rev Notes
Changed:
<
<
48 CERN (Magnus' lab)
>
>
48 CERN (Magnus' lab)
 
49 Cornell t.b.d. 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1

Revision 10114 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 23 to 23
 
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
Changed:
<
<
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
>
>
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
>
>
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
60 BU t.b.d.      
         
Changed:
<
<
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Notes: 1, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
>
>
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
 seems to have solved |
Changed:
<
<
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
>
>
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
Changed:
<
<
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
>
>
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
Line: 46 to 46
  Notes:
Deleted:
<
<
  1. Front Panel on, prepping for shipment
 
  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)
Added:
>
>
  1. Front Panel on, prepping for shipment
 

Revision 10013 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
54 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
>
>
53 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
 
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
56 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
>
>
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
 
60 BU t.b.d.      
         
Changed:
<
<
61 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
>
>
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Notes: 1, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
 seems to have solved |
Changed:
<
<
65 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
67 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
>
>
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
 
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
Line: 46 to 46
  Notes:
Added:
>
>
  1. Front Panel on, prepping for shipment
 
  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)

Revision 9913 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP enabled
>
>
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
 
54 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Line: 37 to 37
 
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
66 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1
>
>
66 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
 
67 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken

Revision 9813 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
>
>
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP enabled
 
54 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Line: 37 to 37
 
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
66 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
>
>
66 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1
 
67 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken

Revision 9713 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
Added:
>
>
 
Serial No Location Owner MMC Rev Firmware Rev Notes
48 CERN (Magnus' lab)
Changed:
<
<
49 Cornell BU 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU HCAL 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU HCAL 2.1   Power supply short on T1
52 BU HCAL 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU HCAL 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
54 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
60 BU HCAL      
>
>
49 Cornell t.b.d. 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
54 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
60 BU t.b.d.      
 
         
Changed:
<
<
61 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
| 64 | BU | HCAL | 2.1 |T1: 0x107 T2: 0x1d | Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
>
>
61 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
 seems to have solved |
Changed:
<
<
65 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1
67 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU HCAL 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU HCAL 2.1   Handle broken
70 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1
>
>
65 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
67 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
  Notes:

Revision 9612 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 21 to 21
 
50 BU HCAL 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU HCAL 2.1   Power supply short on T1
52 BU HCAL 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
>
>
53 BU HCAL 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
 
54 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2

Revision 9512 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
Changed:
<
<
Serial No Location MMC Rev Firmware Rev Notes
>
>
Serial No Location Owner MMC Rev Firmware Rev Notes
 
48 CERN (Magnus' lab)
Changed:
<
<
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU 2.1   Power supply short on T1
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
54 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
59 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
60 BU      
>
>
49 Cornell BU 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU HCAL 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU HCAL 2.1   Power supply short on T1
52 BU HCAL 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
54 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
60 BU HCAL      
 
         
Changed:
<
<
61 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
62 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
63 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
66 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
67 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
68 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, blue indicator does not turn on when handle released (while in crate)
69 BU 2.1   Handle broken
70 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
61 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
64 BU HCAL 2.1 T1: 0x107 T2: 0x1d Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1
67 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU HCAL 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU HCAL 2.1   Handle broken
70 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1

Notes:

  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)

  AMC13XG with Kintex-7

Revision 9409 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
51 BU 2.1   Power supply short on T1
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
Changed:
<
<
54 BU 2.1 T1: 0x107 T2: 0x1e Programmed OK, Short across Capacitor C70 fixed
>
>
54 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
 
55 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
Line: 32 to 32
 
         
61 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
62 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
Changed:
<
<
63 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
63 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
 
66 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
67 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
68 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, blue indicator does not turn on when handle released (while in crate)

Revision 9308 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
51 BU 2.1   Power supply short on T1
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
Changed:
<
<
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1e Programmed OK
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
54 BU 2.1 T1: 0x107 T2: 0x1e Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
59 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
 
60 BU      
         
Changed:
<
<
61 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
62 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
61 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
62 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
 
63 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK

Revision 9208 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 20 to 20
 
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU 2.1   Power supply short on T1
Changed:
<
<
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted) Programmed OK
>
>
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
 
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK

Revision 9108 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 23 to 23
 
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted) Programmed OK
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
Changed:
<
<
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
>
>
55 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1e Programmed OK
 
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
60 BU      
         

Revision 9008 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 21 to 21
 
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU 2.1   Power supply short on T1
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted) Programmed OK
Changed:
<
<
53 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
 
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK

Revision 8908 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 20 to 20
 
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU 2.1   Power supply short on T1
Changed:
<
<
52 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
>
>
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted) Programmed OK
 
53 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK

Revision 8802 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 22 to 22
 
51 BU 2.1   Power supply short on T1
52 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
53 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
Changed:
<
<
54 BU 2.1   problem supplying crate power
>
>
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
 
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
Changed:
<
<
57 BU 2.1   problem supplying crate power
>
>
57 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
 
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
60 BU      
         
Changed:
<
<
61 BU     Short across Capacitor C70
>
>
61 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
 
62 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
63 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved

Revision 8701 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 30 to 30
 
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
60 BU      
         
Changed:
<
<
61 BU      
62 BU      
63 BU      
64 BU      
65 BU      
66 BU      
67 BU      
68 BU      
69 BU      
70 BU      
>
>
61 BU     Short across Capacitor C70
62 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
63 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
64 BU 2.1 T1: 0x107 T2: 0x1d Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
65 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
66 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
67 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
68 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, blue indicator does not turn on when handle released (while in crate)
69 BU 2.1   Handle broken
70 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
  AMC13XG with Kintex-7

Revision 8601 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 29 to 29
 
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
60 BU      
Changed:
<
<
>
>
         
61 BU      
62 BU      
63 BU      
64 BU      
65 BU      
66 BU      
67 BU      
68 BU      
69 BU      
70 BU      
  AMC13XG with Kintex-7

Revision 8529 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 20 to 20
 
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU 2.1   Power supply short on T1
Changed:
<
<
52 BU      
>
>
52 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
 
53 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
Changed:
<
<
54 BU      
55 BU      
56 BU 2.1    
57 BU      
>
>
54 BU 2.1   problem supplying crate power
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
57 BU 2.1   problem supplying crate power
 
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
Changed:
<
<
59 BU      
>
>
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
 
60 BU      

Revision 8429 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 19 to 19
 
48 CERN (Magnus' lab)
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
Changed:
<
<
51 BU 2.1    
52 BU     Power supply short on T1
53 BU     T1 OK.
>
>
51 BU 2.1   Power supply short on T1
52 BU      
53 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
 
54 BU      
55 BU      
Changed:
<
<
56 BU      
>
>
56 BU 2.1    
 
57 BU      
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
59 BU      
Changed:
<
<
20 BU      
>
>
60 BU      
 

Revision 8329 Apr 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 26 to 26
 
55 BU      
56 BU      
57 BU      
Changed:
<
<
58 BU      
>
>
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
 
59 BU      
20 BU      

Revision 8229 Apr 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 10 to 10
  AMC13PartNumbers and barcode labels
Changed:
<
<		New T2 Boards
>
>		Production I -- 2014
 
Changed:
<
<		NOTE: 3 prototype "new T2" boards were assembled in 2014-03 with serial numbers 48, 49, 50. They are listed in the table below.
>
>		Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
 
Serial No Location MMC Rev Firmware Rev Notes
48 CERN (Magnus' lab)
Changed:
<
<
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipping 2014/04/14
>
>
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
 
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
Added:
>
>
51 BU 2.1    
52 BU     Power supply short on T1
53 BU     T1 OK.
54 BU      
55 BU      
56 BU      
57 BU      
58 BU      
59 BU      
20 BU      
  AMC13XG with Kintex-7

Revision 8125 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Revision 8025 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 29 to 29
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0xc T2: 0x17 BU IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0x1c T2: 0x17 BU, EDF Eric is using as model for placing labels. IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 
42 (0x2a) HW Tested 2.1 T1: 0x103 T2: 0x19 BU Sent to Tim Gorringe (G-2) (2/14/14 Working and Tested)  
Changed:
<
<
43 (0x2b) HW Tested 2.1 T1: 0x103 T2: 0x19 BU Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
>
>
43 (0x2b) HW Tested 2.1 T1: 0x1f T2: 0x107 BU Has rarp-enabled firmware, debugging problems w/ rarp. Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    

Revision 7925 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 29 to 29
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0xc T2: 0x17 BU IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  

Revision 7824 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 25 to 25
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2014/04/09) Currently out of Commission, T2 removed, replaced w/ 49 T2 (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board, for some reason the IP address autoconfigures to 192.168.1.100/1 equivalent ip of SN77) (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Disassembled (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU (2014/04/09) disassmabled. Has new T2 board (serial num 50), experiencing problems. Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  

Revision 7715 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 31 to 31
 
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU (2014/04/09) disassmabled. Has new T2 board (serial num 50), experiencing problems. Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
>
>
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
 
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 

Revision 7614 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 NOTE: 3 prototype "new T2" boards were assembled in 2014-03 with serial numbers 48, 49, 50. They are listed in the table below.
Changed:
<
<
Serial No Location Notes
>
>
Serial No Location MMC Rev Firmware Rev Notes
 
48 CERN (Magnus' lab)
Changed:
<
<
49 BU T2 in SN 33
50 BU disassembled
>
>
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipping 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
  AMC13XG with Kintex-7

Revision 7509 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 NOTE: 3 prototype "new T2" boards were assembled in 2014-03 with serial numbers 48, 49, 50. They are listed in the table below.
Changed:
<
<
Serial No Location
>
>
Serial No Location Notes
 
48 CERN (Magnus' lab)
Changed:
<
<
49 BU
50 BU
>
>
49 BU T2 in SN 33
50 BU disassembled
  AMC13XG with Kintex-7

Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
>
>
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2014/04/09) Currently out of Commission, T2 removed, replaced w/ 49 T2 (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board, for some reason the IP address autoconfigures to 192.168.1.100/1 equivalent ip of SN77) (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Has new T2 board (serial num 50), experiencing problems. Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU (2014/04/09) disassmabled. Has new T2 board (serial num 50), experiencing problems. Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  

Revision 7407 Apr 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 10 to 10
  AMC13PartNumbers and barcode labels
Added:
>
>		New T2 Boards

NOTE: 3 prototype "new T2" boards were assembled in 2014-03 with serial numbers 48, 49, 50. They are listed in the table below.

Serial No Location
48 CERN (Magnus' lab)
49 BU
50 BU
 AMC13XG with Kintex-7

Serial No Status MMC Rev Firmware Rev Location Notes Computer

Revision 7307 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 19 to 19
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Has new T2 board (serial num 50), experiencing problems. Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  

Revision 7226 Mar 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 14 to 14
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky Sent to Tim Gorringe (G-2) (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
>
>
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board, for some reason the IP address autoconfigures to 192.168.1.100/1 equivalent ip of SN77) (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
Line: 22 to 22
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
Changed:
<
<
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/14/14 Working and Tested)  
>
>
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  
 
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/14/14 Working and Tested)  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x103 T2: 0x19 BU Sent to Tim Gorringe (G-2) (2/14/14 Working and Tested)  
 
43 (0x2b) HW Tested 2.1 T1: 0x103 T2: 0x19 BU Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  

Revision 7114 Mar 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 8 to 8
 
32-46 V2 with Kintex-7, Spartan 6 LX 150T
48+ V2 with Kintex-7, Spartan 6 LX 240T
Added:
>
>		AMC13PartNumbers and barcode labels
 AMC13XG with Kintex-7

Serial No Status MMC Rev Firmware Rev Location Notes Computer

Revision 7013 Mar 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Added:
>
>
Serial Number Range Board Type/Rev
1-12 V1 with Virtex-6 LX 130T
16-20 V1 with Virtex-6 LX 240T
32-46 V2 with Kintex-7, Spartan 6 LX 150T
48+ V2 with Kintex-7, Spartan 6 LX 240T
 AMC13XG with Kintex-7

Serial No Status MMC Rev Firmware Rev Location Notes Computer

Revision 6903 Mar 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky Sent to Tim Gorringe (G-2) (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (Working, 3/3/14, using SN34 T1 and SN37 T2 board, for some reason the IP address autoconfigures to 192.168.1.100/1 equivalent ip of SN77) (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 

Revision 6803 Mar 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 6 to 6
 
Serial No Status
<-- -->
Sorted ascending 		MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
>
>
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky Sent to Tim Gorringe (G-2) (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  

Revision 6714 Feb 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 6 to 6
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x102 T2: 0x19 BU T3 reattached (after Clock Tests) FW issues  
>
>
33 (0x21) HW Tested 2.1 T1: 0x103 T2: 0x19 BU T3 reattached (after Clock Tests), (2/14/14 Working and Tested)  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU, EDF Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
Changed:
<
<
40 (0x28) HW Tested 2.1 T1: 0x100 T2: 0x19 BU    
>
>
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/14/14 Working and Tested)  
 
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x100 T2: 0x19 BU    
43 (0x2b) HW Tested 2.1 T1: 0x100 T2: 0x19 BU Working (12/13) T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x103 T2: 0x19 BU (2/14/14 Working and Tested)  
43 (0x2b) HW Tested 2.1 T1: 0x103 T2: 0x19 BU Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    

Revision 6613 Feb 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 61 to 61
 Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration. Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.
Changed:
<
<
Inventory of SFPs in BU CMS Lab
>
>
Inventory of SFPs in BU CMS Lab
 -- EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012

Revision 6512 Feb 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 6 to 6
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
>
>
33 (0x21) HW Tested 2.1 T1: 0x102 T2: 0x19 BU T3 reattached (after Clock Tests) FW issues  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU, EDF Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU, EDF Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
40 (0x28) HW Tested 2.1 T1: 0x100 T2: 0x19 BU    
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
>
>
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x100 T2: 0x19 BU Working (12/13). T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test.  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x100 T2: 0x19 BU    
 
43 (0x2b) HW Tested 2.1 T1: 0x100 T2: 0x19 BU Working (12/13) T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
Line: 61 to 61
 Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration. Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.
Added:
>
>
Inventory of SFPs in BU CMS Lab
 -- EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012 \ No newline at end of file

Revision 6410 Feb 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 

Revision 6313 Dec 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU, EDF (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU, EDF Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
Changed:
<
<
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
>
>
40 (0x28) HW Tested 2.1 T1: 0x100 T2: 0x19 BU    
 
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x95 T2: 0x18 BU T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test.  
43 (0x2b) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x100 T2: 0x19 BU Working (12/13). T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test.  
43 (0x2b) HW Tested 2.1 T1: 0x100 T2: 0x19 BU Working (12/13) T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    

Revision 6215 Nov 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 17 to 17
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test. (11/13) However, there is now a issue with sending broadcast command such that the uHTR EvN, OrN, and BcN cannot but reset using TTT broadcast commands  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x95 T2: 0x18 BU T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test.  
 
43 (0x2b) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  

Revision 6113 Nov 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 17 to 17
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T1 Error gone after firmware upgrade to 0x94, production test still needed  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test. (11/13) However, there is now a issue with sending broadcast command such that the uHTR EvN, OrN, and BcN cannot but reset using TTT broadcast commands  
 
43 (0x2b) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  

Revision 6021 Oct 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN39 T2 w/ the SN43 T1 seems to work. SN39 T1 w/ SN43 T2 exhibiting same problems.  
>
>
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T1 Error gone after firmware upgrade to 0x94, production test still needed  
43 (0x2b) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
Changed:
<
<
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  
>
>
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    
 

Boards with Virtex-6 LX130T

Line: 47 to 47
 
17 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
18 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
19 Tested OK S=0x17 V=0x2a BU Retest 8/31/12, productiontest errors 6/18/13  
Changed:
<
<
20 Tested OK   BU    
>
>
20 Tested OK   BU? Not in CMS Lab    
  Two more boards shipped to DESY and Rice in Nov 2012.

Revision 5908 Oct 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 19 to 19
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
Changed:
<
<
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 BU Ship 10/1/13 to CERN, Laza  
>
>
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
 
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  
Line: 29 to 29
 
Serial No Status Firmware Rev Location Notes Computer
1 Tested OK S=0x11 V=0x25 CERN for Calcutta Retest 8/31/12  
2 ? ?      
Changed:
<
<
3 Tested OK S3 BU Crate Retest 8/31/12 (LED issue?). 9/9/13 in U Florida? Does not seem to be at BU  
>
>
3 Tested OK S3 UFL Retest 8/31/12 (LED issue?). 9/9/13 in U Florida with Cody Reeves  
 
4 Tested OK S3 BU Crate Retest 8/31/12  
5 Tested OK S3 Vienna (GT) shipped to Vienna Feb2012  
6 Tested OK S6 V3 40-2B0-01 Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] pcphcmd01.cern.ch

Revision 5801 Oct 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 20 to 20
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
Changed:
<
<
45 (0x2d) HW Tested 2.1 T1:0x91 T2: 0x17 BU    
>
>
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 BU Ship 10/1/13 to CERN, Laza  
 
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  

Revision 5713 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
 
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. T2 w/ the SN43 T1 seems to work. T1 w/ SN43 T2 exhibiting same problems.  
>
>
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN39 T2 w/ the SN43 T1 seems to work. SN39 T1 w/ SN43 T2 exhibiting same problems.  
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 

Revision 5612 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
 
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013)  
>
>
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. T2 w/ the SN43 T1 seems to work. T1 w/ SN43 T2 exhibiting same problems.  
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
Changed:
<
<
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
>
>
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x91 T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  

Revision 5509 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 29 to 29
 
Serial No Status Firmware Rev Location Notes Computer
1 Tested OK S=0x11 V=0x25 CERN for Calcutta Retest 8/31/12  
2 ? ?      
Changed:
<
<
3 Tested OK S3 BU Crate Retest 8/31/12 (LED issue?)  
>
>
3 Tested OK S3 BU Crate Retest 8/31/12 (LED issue?). 9/9/13 in U Florida? Does not seem to be at BU  
 
4 Tested OK S3 BU Crate Retest 8/31/12  
5 Tested OK S3 Vienna (GT) shipped to Vienna Feb2012  
6 Tested OK S6 V3 40-2B0-01 Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] pcphcmd01.cern.ch

Revision 5405 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Revision 5304 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 17 to 17
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
>
>
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
 
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
Changed:
<
<
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza  
>
>
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
 
45 (0x2d) HW Tested 2.1 T1:0x91 T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  

Revision 5220 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 14 to 14
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013)  
Changed:
<
<
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
>
>
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
 
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza  
Changed:
<
<
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Prepared to ship to Bristol  
>
>
45 (0x2d) HW Tested 2.1 T1:0x91 T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  
 

Boards with Virtex-6 LX130T

Revision 5113 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
 
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU Won't power up? (Testing, 8/6/2013)  
>
>
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013)  
 
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 

Revision 5006 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
 
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Won't power up?  
>
>
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU Won't power up? (Testing, 8/6/2013)  
 
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 

Revision 4902 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 21 to 21
 
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza  
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
Changed:
<
<
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
>
>
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Prepared to ship to Bristol  
 

Boards with Virtex-6 LX130T

Revision 4801 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 6 to 6
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
>
>
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
 
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
Line: 18 to 18
 
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
Changed:
<
<
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
>
>
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza  
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    

Revision 4701 Aug 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 27 to 27
 Boards with Virtex-6 LX130T

Serial No Status Firmware Rev Location Notes Computer
Changed:
<
<
1 Tested OK S=0x10 V=0xd CERN for Calcutta Retest 8/31/12  
>
>
1 Tested OK S=0x11 V=0x25 CERN for Calcutta Retest 8/31/12  
 
2 ? ?      
3 Tested OK S3 BU Crate Retest 8/31/12 (LED issue?)  
4 Tested OK S3 BU Crate Retest 8/31/12  
Line: 37 to 37
 
8 Tested OK ? Minnesota Shipped 24-Jan-2012 to UMN [2] cmslab1.spa.umn.edu
9 Fail ? BU    
10 Tested OK S6 V3   shipped to CERN Feb2012 hcaldaq12 (P5)
Changed:
<
<
11 Tested OK S3   shipping to CERN Feb2012 in 904?
>
>
11 Tested OK S3, S=0x17 V=0x25   shipping to CERN Feb2012, "AMC13 s/n 11 to the Meyrin site, and will bring it to Tina on Tuesday, for shipment to FNAL" Aug 1, 2013 in 904?
 
12 Tested OK 2012-01-21 Imperial Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College heppc209.hep.ph.ic.ac.uk

Boards with Virtex-6 LX240T

Revision 4630 Jul 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Changed:
<
<		 Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
>
>		Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
  AMC13XG with Kintex-7

Revision 4530 Jul 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to CERN  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
>
>
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Won't power up?  
 
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to Bristol(?)  
>
>
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
Changed:
<
<
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU HW working as of (7/25), ready to ship to CERN  
>
>
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    

Revision 4425 Jul 2013 - BenjaminBDickens

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Previous communications problems seem to have been fixed  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to CERN  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Line: 19 to 19
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
Changed:
<
<
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU More Bizzare problems (see test log), HW Working, although multiple runs of production test cause errors occasionally.  
>
>
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU HW working as of (7/25), ready to ship to CERN  
 
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    

Revision 4325 Jul 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 15 to 15
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to Imperial  
>
>
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to Bristol(?)  
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  

Revision 4225 Jul 2013 - BenjaminBDickens

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 15 to 15
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Tested again (7/16), ready to ship to Imperial  
>
>
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU HW functional as of (7/25), ready to ship to Imperial  
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
Changed:
<
<
44 (0x2c) HW Tested 2.1 T1: 0x8a T2:0x17 BU More Bizzare problems (see test log), HW Working, although multiple runs of production test cause errors occasionally  
>
>
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 BU More Bizzare problems (see test log), HW Working, although multiple runs of production test cause errors occasionally.  
 
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    

Revision 4116 Jul 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 6 to 6
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
>
>
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
 
34 (0x22) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Previous communications problems seem to have been fixed  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
Line: 14 to 14
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
Changed:
<
<
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
>
>
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Tested again (7/16), ready to ship to Imperial  
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
Changed:
<
<
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
44 (0x2c) (HW Issues) 2.1   BU More Bizzare problems (see test log)  
>
>
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Probe attached for Clock Tests (T3 off)  
44 (0x2c) HW Tested 2.1 T1: 0x8a T2:0x17 BU More Bizzare problems (see test log), HW Working, although multiple runs of production test cause errors occasionally  
 
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    

Revision 4019 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 11 to 11
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25)     T1: 0x87 T2:0x17 BU Handle mechanism fixed  
>
>
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  

Revision 3919 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 11 to 11
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Changed:
<
<
37 (0x25)       BU    
>
>
37 (0x25)     T1: 0x87 T2:0x17 BU Handle mechanism fixed  
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
Changed:
<
<
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has front panel 37 -- this is likely a mistake that will be corrected.  
>
>
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
 
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    

Revision 3818 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
Changed:
<
<
34 (0x22) (HW Issues) 2.1   BU Bizzare problems (see test log)  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Previous communications problems seem to have been fixed  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Line: 15 to 15
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has front panel 37 -- this is likely a mistake that will be corrected.  
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
>
>
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
 
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
44 (0x2c) (HW Issues) 2.1   BU More Bizzare problems (see test log)  
Changed:
<
<
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
>
>
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
 
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
Line: 46 to 46
 
16 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12 daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu
17 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
18 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
Changed:
<
<
19 Tested OK   BU Retest 8/31/12  
>
>
19 Tested OK S=0x17 V=0x2a BU Retest 8/31/12, productiontest errors 6/18/13  
 
20 Tested OK   BU    

Two more boards shipped to DESY and Rice in Nov 2012.

Revision 3712 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 14 to 14
 
37 (0x25)       BU    
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
Changed:
<
<
40 (0x28)       BU   (has front panel 37 -- this is likely a mistake that will be corrected)
>
>
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has front panel 37 -- this is likely a mistake that will be corrected.  
 
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
 
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    

Revision 3611 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 17 to 17
 
40 (0x28)       BU   (has front panel 37 -- this is likely a mistake that will be corrected)
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
 
Changed:
<
<
42 (0x2a)       BU    
>
>
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
 
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
44 (0x2c) (HW Issues) 2.1   BU More Bizzare problems (see test log)  
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  

Revision 3511 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 6 to 6
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
Changed:
<
<
33 (0x21)       BU    
>
>
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
 
34 (0x22) (HW Issues) 2.1   BU Bizzare problems (see test log)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
Line: 14 to 14
 
37 (0x25)       BU    
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
Changed:
<
<
40 (0x28)       BU    
>
>
40 (0x28)       BU   (has front panel 37 -- this is likely a mistake that will be corrected)
 
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
 
42 (0x2a)       BU    

Revision 3407 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 15 to 15
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28)       BU    
Changed:
<
<
41 (0x29) HW Tested 2.1 T1: 0x87 T2: 0x17 BU    
>
>
41 (0x29) HW Tested 2.1 T1: 0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
 
 
42 (0x2a)       BU    
Changed:
<
<
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    
>
>
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU    
 
44 (0x2c) (HW Issues) 2.1   BU More Bizzare problems (see test log)  
Changed:
<
<
45 (0x2d) HW Tested 2.1 T1:0x87 T2: 0x17 BU Using T1 0x87 because 0x89 caused errors  
46 (0x2e) HW Tested 2.1 T1:0x87 T2: 0x17 BU    
>
>
45 (0x2d) HW Tested 2.1 T1:0x8a T2: 0x17 BU Can successfully run production test consecutively w/o handle reset  
46 (0x2e) HW Tested 2.1 T1:0x8a T2: 0x17 BU    
 

Boards with Virtex-6 LX130T

Revision 3306 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21)       BU    
Changed:
<
<
34 (0x22) HW Issues 2.1   BU Bizzare problems (see test log)  
>
>
34 (0x22) (HW Issues) 2.1   BU Bizzare problems (see test log)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Line: 19 to 19
 
 
42 (0x2a)       BU    
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    
Changed:
<
<
44 (0x2c) HW Issues 2.1   BU More Bizzare problems (see test log)  
>
>
44 (0x2c) (HW Issues) 2.1   BU More Bizzare problems (see test log)  
 
45 (0x2d) HW Tested 2.1 T1:0x87 T2: 0x17 BU Using T1 0x87 because 0x89 caused errors  
46 (0x2e) HW Tested 2.1 T1:0x87 T2: 0x17 BU    

Revision 3206 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 15 to 15
 
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28)       BU    
Changed:
<
<
41 (0x29)       BU    
>
>
41 (0x29) HW Tested 2.1 T1: 0x87 T2: 0x17 BU    
 
 
42 (0x2a)       BU    
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    

Revision 3105 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 21 to 21
 
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    
44 (0x2c) HW Issues 2.1   BU More Bizzare problems (see test log)  
45 (0x2d) HW Tested 2.1 T1:0x87 T2: 0x17 BU Using T1 0x87 because 0x89 caused errors  
Changed:
<
<
46 (0x2e)       BU    
>
>
46 (0x2e) HW Tested 2.1 T1:0x87 T2: 0x17 BU    
 

Boards with Virtex-6 LX130T

Revision 3004 Jun 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21)       BU    
Changed:
<
<
34 (0x22)   2.1   BU Bizzare problems (see test log)  
>
>
34 (0x22) HW Issues 2.1   BU Bizzare problems (see test log)  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
Line: 18 to 18
 
41 (0x29)       BU    
 
42 (0x2a)       BU    
Changed:
<
<
43 (0x2b)       BU    
44 (0x2c)       BU    
45 (0x2d)       BU    
>
>
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    
44 (0x2c) HW Issues 2.1   BU More Bizzare problems (see test log)  
45 (0x2d) HW Tested 2.1 T1:0x87 T2: 0x17 BU Using T1 0x87 because 0x89 caused errors  
 
46 (0x2e)       BU    

Revision 2904 Jun 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 7 to 7