Difference: AMC13BoardDatabase (96 vs. 97)

Revision 9713 May 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
Added:
>
>
 
Serial No
<-- -->
Sorted ascending
Location Owner MMC Rev Firmware Rev Notes
48 CERN (Magnus' lab)
Changed:
<
<
49 Cornell BU 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU HCAL 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU HCAL 2.1   Power supply short on T1
52 BU HCAL 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU HCAL 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
54 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
60 BU HCAL      
>
>
49 Cornell t.b.d. 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU t.b.d. 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
54 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
57 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
58 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
59 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
60 BU t.b.d.      
 
         
Changed:
<
<
61 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
| 64 | BU | HCAL | 2.1 |T1: 0x107 T2: 0x1d | Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
>
>
61 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
62 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
63 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Cannot connect, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
 seems to have solved |
Changed:
<
<
65 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1
67 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU HCAL 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU HCAL 2.1   Handle broken
70 BU HCAL 2.1 T1: 0x107 T2: 0x1d Notes: 1
>
>
65 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
66 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
67 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, 3
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
  Notes:
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback