Difference: AMC13BoardDatabase (95 vs. 96)

Revision 9612 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 21 to 21
 
50 BU HCAL 2.1 T1: 0x107 T2: 0xe T2 in SN 33
51 BU HCAL 2.1   Power supply short on T1
52 BU HCAL 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
Changed:
<
<
53 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
>
>
53 BU HCAL 2.1 T1: 0x200 T2: 0x20 Notes: 1, 2, eeprom set to rarp enabled
 
54 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2, 3
55 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU HCAL 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback