Difference: AMC13BoardDatabase (90 vs. 91)

Revision 9108 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 23 to 23
 
52 BU 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted) Programmed OK
53 BU 2.1 T1: 0x107 T2: 0x1e Loopback Test Passed, Programmed OK
54 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
Changed:
<
<
55 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1c Programmed OK
>
>
55 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
56 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK
57 BU 2.1 T1: 0x107 T2: 0x1d Loopback Test Passed, Programmed OK, Short across Capacitor C70 fixed
58 BU 2.1 T1: 0x107 T2: 0x1e Programmed OK
 
59 BU 2.1 T1: 0x107 T2: 0x1d Programmed OK
60 BU      
         
View topic | History: r116 < r115 < r114 < r113 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback