| |
| META TOPICPARENT |
name="HcalDTC" |
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal. |
| |
| 35 (0x23) |
HW Tested |
2.0 |
T1: 0x84 T2: 0x17 |
UW Madison |
FW currently broken (IPbus issue) |
|
| 36 (0x24) |
HW Tested |
2.0 |
T1: 0x86 T2: 0x17 |
Imperial College |
FW currently broken (IPbus issue) |
|
| |
|
|
<
< |
| 37 (0x25) |
Some HW Problems |
|
T1: 0x87 T2: 0x17 |
BU |
(Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem) |
|
|
>
> |
| 37 (0x25) |
Some HW Problems |
|
T1: 0xc T2: 0x17 |
BU |
IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem) |
|
|
| |
| 38 (0x26) |
HW Tested |
2.0 |
T1: 0x87 T2: 0x17 |
CERN |
FW works at 2.5 Gb/s backplane link speed |
|
| 39 (0x27) |
HW Tested |
2.1 |
T1: 0x92 T2: 0x17 |
BU |
Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing) |
|
| 40 (0x28) |
HW Tested |
2.1 |
T1: 0x103 T2: 0x19 |
Kentucky |
(2/14/14 Working and Tested) |
|
|
Copyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.