Difference: AMC13BoardDatabase (75 vs. 76)

Revision 7614 Apr 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 15 to 15
 NOTE: 3 prototype "new T2" boards were assembled in 2014-03 with serial numbers 48, 49, 50. They are listed in the table below.
Changed:
<
<
Serial No Location Notes
>
>
Serial No Location MMC Rev Firmware Rev Notes
 
48 CERN (Magnus' lab)
Changed:
<
<
49 BU T2 in SN 33
50 BU disassembled
>
>
49 Cornell 2.1 T1: 0x107 T2: 0xe Shipping 2014/04/14
50 BU 2.1 T1: 0x107 T2: 0xe T2 in SN 33
  AMC13XG with Kintex-7
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback