| |
| META TOPICPARENT |
name="HcalDTC" |
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal. |
| |
|
|
<
< |
| 34 (0x22) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
BU |
(prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. |
|
|
>
> |
| 34 (0x22) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
BU, EDF |
(prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. |
|
|
| |
| 35 (0x23) |
HW Tested |
2.0 |
T1: 0x84 T2: 0x17 |
UW Madison |
FW currently broken (IPbus issue) |
|
| 36 (0x24) |
HW Tested |
2.0 |
T1: 0x86 T2: 0x17 |
Imperial College |
FW currently broken (IPbus issue) |
|
| |
|
|
<
< |
| 37 (0x25) |
Some HW Problems |
|
T1: 0x87 T2: 0x17 |
BU |
Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware |
|
|
>
> |
| 37 (0x25) |
Some HW Problems |
|
T1: 0x87 T2: 0x17 |
BU, EDF |
Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware |
|
|
| |
| 38 (0x26) |
HW Tested |
2.0 |
T1: 0x87 T2: 0x17 |
CERN |
FW works at 2.5 Gb/s backplane link speed |
|
| 39 (0x27) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
Cornell |
Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing) |
|
|
|
<
< |
| 40 (0x28) |
HW Tested |
2.1 |
T1: 0x91 T2: 0x17 |
BU |
Currently being used in AMC13 slot--has correct front panel |
|
|
>
> |
| 40 (0x28) |
HW Tested |
2.1 |
T1: 0x100 T2: 0x19 |
BU |
|
|
|
| |
| 41 (0x29) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
BU |
Ship 7/29/13 to Magnus c/o Laza |
|
| |
|
|
<
< |
| 42 (0x2a) |
HW Tested |
2.1 |
T1: 0x95 T2: 0x18 |
BU |
T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test. |
|
| 43 (0x2b) |
HW Tested |
2.1 |
T1: 0x94 T2: 0x17 |
BU |
T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43 |
|
|
>
> |
| 42 (0x2a) |
HW Tested |
2.1 |
T1: 0x100 T2: 0x19 |
BU |
Working (12/13). T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test. |
|
| 43 (0x2b) |
HW Tested |
2.1 |
T1: 0x100 T2: 0x19 |
BU |
Working (12/13) T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43 |
|
|
| |
| 44 (0x2c) |
HW Tested |
2.1 |
T1: 0x8d T2:0x17 |
CERN |
Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board |
|
| 45 (0x2d) |
HW Tested |
2.1 |
T1:0x94 T2: 0x17 |
CERN |
Ship 10/1/13 to CERN, Laza |
|
| 46 (0x2e) |
HW Tested |
2.1 |
T1:0x8d T2: 0x17 |
Bristol |
|
|
|
Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.