|
META TOPICPARENT |
name="HcalDTC" |
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal. |
|
40 (0x28) |
HW Tested |
2.1 |
T1: 0x91 T2: 0x17 |
BU |
Currently being used in AMC13 slot--has correct front panel |
|
41 (0x29) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
BU |
Ship 7/29/13 to Magnus c/o Laza |
|
|
|
|
< < |
42 (0x2a) |
HW Tested |
2.1 |
T1: 0x94 T2: 0x17 |
BU |
T1 Error gone after firmware upgrade to 0x94, production test still needed |
|
|
> > |
42 (0x2a) |
HW Tested |
2.1 |
T1: 0x94 T2: 0x17 |
BU |
T1 Error gone after firmware upgrade to 0x94, production test still needed. (11/8) After upgrade to 0x95 and 0x18 by Mr. Wu: passed production test. (11/13) However, there is now a issue with sending broadcast command such that the uHTR EvN, OrN, and BcN cannot but reset using TTT broadcast commands |
|
|
|
43 (0x2b) |
HW Tested |
2.1 |
T1: 0x94 T2: 0x17 |
BU |
T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43 |
|
44 (0x2c) |
HW Tested |
2.1 |
T1: 0x8d T2:0x17 |
CERN |
Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board |
|
45 (0x2d) |
HW Tested |
2.1 |
T1:0x94 T2: 0x17 |
CERN |
Ship 10/1/13 to CERN, Laza |
|
|