Difference: AMC13BoardDatabase (59 vs. 60)

Revision 6021 Oct 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 7 to 7
 
Serial No Status MMC Rev Firmware Rev Location Notes Computer
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
33 (0x21) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests)  
Changed:
<
<
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13  
>
>
34 (0x22) HW Tested 2.1 T1: 0x8d T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.  
 
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
 
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN39 T2 w/ the SN43 T1 seems to work. SN39 T1 w/ SN43 T2 exhibiting same problems.  
>
>
39 (0x27) HW Tested 2.1 T1: 0x8d T2: 0x17 Cornell Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
 
40 (0x28) HW Tested 2.1 T1: 0x91 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
 
Changed:
<
<
42 (0x2a) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T1 NOT FOUND ERROR  
43 (0x2b) HW Tested 2.1 T1: 0x8a T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
>
>
42 (0x2a) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T1 Error gone after firmware upgrade to 0x94, production test still needed  
43 (0x2b) HW Tested 2.1 T1: 0x94 T2: 0x17 BU T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43  
 
44 (0x2c) HW Tested 2.1 T1: 0x8d T2:0x17 CERN Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board  
45 (0x2d) HW Tested 2.1 T1:0x94 T2: 0x17 CERN Ship 10/1/13 to CERN, Laza  
Changed:
<
<
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 BU Ship to Bristol  
>
>
46 (0x2e) HW Tested 2.1 T1:0x8d T2: 0x17 Bristol    
 

Boards with Virtex-6 LX130T

Line: 47 to 47
 
17 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
18 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
19 Tested OK S=0x17 V=0x2a BU Retest 8/31/12, productiontest errors 6/18/13  
Changed:
<
<
20 Tested OK   BU    
>
>
20 Tested OK   BU? Not in CMS Lab    
  Two more boards shipped to DESY and Rice in Nov 2012.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback