|
META TOPICPARENT |
name="HcalDTC" |
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal. |
|
|
42 (0x2a) |
HW Tested |
2.1 |
T1: 0x8a T2: 0x17 |
BU |
T1 NOT FOUND ERROR |
|
43 (0x2b) |
HW Tested |
2.1 |
T1: 0x8a T2: 0x17 |
BU |
T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43 |
|
|
|
< < |
44 (0x2c) |
HW Tested |
2.1 |
T1: 0x8d T2:0x17 |
BU |
Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board |
|
45 (0x2d) |
HW Tested |
2.1 |
T1:0x94 T2: 0x17 |
BU |
Ship 10/1/13 to CERN, Laza |
|
|
> > |
44 (0x2c) |
HW Tested |
2.1 |
T1: 0x8d T2:0x17 |
CERN |
Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board |
|
45 (0x2d) |
HW Tested |
2.1 |
T1:0x94 T2: 0x17 |
CERN |
Ship 10/1/13 to CERN, Laza |
|
|
|
46 (0x2e) |
HW Tested |
2.1 |
T1:0x8d T2: 0x17 |
BU |
Ship to Bristol |
|
|
|
|
|
< < |
3 |
Tested OK |
S3 |
BU Crate |
Retest 8/31/12 (LED issue?). 9/9/13 in U Florida? Does not seem to be at BU |
|
|
> > |
3 |
Tested OK |
S3 |
UFL |
Retest 8/31/12 (LED issue?). 9/9/13 in U Florida with Cody Reeves |
|
|
|
4 |
Tested OK |
S3 |
BU Crate |
Retest 8/31/12 |
|
5 |
Tested OK |
S3 |
Vienna (GT) |
shipped to Vienna Feb2012 |
|
6 |
Tested OK |
S6 V3 |
40-2B0-01 |
Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] |
pcphcmd01.cern.ch |
|