|
META TOPICPARENT |
name="HcalDTC" |
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal. |
|
|
37 (0x25) |
Some HW Problems |
|
T1: 0x87 T2: 0x17 |
BU |
Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware |
|
38 (0x26) |
HW Tested |
2.0 |
T1: 0x87 T2: 0x17 |
CERN |
FW works at 2.5 Gb/s backplane link speed |
|
|
|
< < |
39 (0x27) |
HW Tested |
2.1 |
T1: 0x87 T2: 0x17 |
BU |
(prev at cornell) Won't power up? (Testing, 8/6/2013) |
|
|
> > |
39 (0x27) |
HW Tested |
2.1 |
T1: 0x87 T2: 0x17 |
BU |
(prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. T2 w/ the SN43 T1 seems to work. T1 w/ SN43 T2 exhibiting same problems. |
|
|
|
40 (0x28) |
HW Tested |
2.1 |
T1: 0x91 T2: 0x17 |
BU |
Currently being used in AMC13 slot--has correct front panel |
|
41 (0x29) |
HW Tested |
2.1 |
T1: 0x8d T2: 0x17 |
BU |
Ship 7/29/13 to Magnus c/o Laza |
|
|
42 (0x2a) |
HW Tested |
2.1 |
T1: 0x8a T2: 0x17 |
BU |
T1 NOT FOUND ERROR |
|
|
|
< < |
43 (0x2b) |
HW Tested |
2.1 |
T1: 0x8a T2: 0x17 |
BU |
T3 reattached (after Clock Tests) |
|
|
> > |
43 (0x2b) |
HW Tested |
2.1 |
T1: 0x8a T2: 0x17 |
BU |
T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43 |
|
|
|
44 (0x2c) |
HW Tested |
2.1 |
T1: 0x8d T2:0x17 |
BU |
Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board |
|
45 (0x2d) |
HW Tested |
2.1 |
T1:0x91 T2: 0x17 |
BU |
|
|
46 (0x2e) |
HW Tested |
2.1 |
T1:0x8d T2: 0x17 |
BU |
Ship to Bristol |
|
|