Difference: AMC13BoardDatabase (50 vs. 51)

Revision 5113 Aug 2013 - DavidZou

Line: 1 to 1
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 13 to 13
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU Won't power up? (Testing, 8/6/2013)  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 BU (prev at cornell) Won't power up? (Testing, 8/6/2013)  
40 (0x28) HW Tested 2.1 T1: 0x8b T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 BU Ship 7/29/13 to Magnus c/o Laza  
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback