Difference: AMC13BoardDatabase (39 vs. 40)

Revision 4019 Jun 2013 - DavidZou

Line: 1 to 1
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 11 to 11
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
37 (0x25)     T1: 0x87 T2:0x17 BU Handle mechanism fixed  
37 (0x25) Some HW Problems   T1: 0x87 T2: 0x17 BU Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
40 (0x28)     T1: 0x87 T2: 0x17 BU Currently being used in AMC13 slot--has correct front panel  
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback