Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.
Line: 14 to 14
37 (0x25)
BU
38 (0x26)
HW Tested
2.0
T1: 0x87 T2: 0x17
CERN
FW works at 2.5 Gb/s backplane link speed
39 (0x27)
HW Tested
2.1
T1: 0x87 T2: 0x17
Cornell
Hand carried via FNAL by Eric
Changed:
< <
40 (0x28)
BU
(has front panel 37 -- this is likely a mistake that will be corrected)
> >
40 (0x28)
T1: 0x87 T2: 0x17
BU
Currently being used in AMC13 slot--has front panel 37 -- this is likely a mistake that will be corrected.
41 (0x29)
HW Tested
2.1
T1: 0x8a T2: 0x17
BU
Can successfully run production test consecutively w/o handle reset