Difference: AMC13BoardDatabase (110 vs. 111)

Revision 11103 Feb 2015 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 33 to 33
 
 
37 (0x25) Some HW Problems   T1: 0x1c T2: 0x17 BU, EDF Eric is using as model for placing labels. IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
Changed:
<
<
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing)  
>
>
39 (0x27) HW Tested 2.1 T1: 0x92 T2: 0x17 BU Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing). Still at BU 2/3/15?  
 
40 (0x28) HW Tested 2.1 T1: 0x103 T2: 0x19 Kentucky (2/14/14 Working and Tested)  
41 (0x29) HW Tested 2.1 T1: 0x8d T2: 0x17 CERN Ship 7/29/13 to Magnus c/o Laza  
 
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback