Difference: AMC13BoardDatabase (106 vs. 107)

Serial No	Location	Owner	MMC Rev	Firmware Rev <-- -->	Notes
66	BU	t.b.d.	2.2	T1: 0x200 T2: 0x20	Notes: 1, RARP tested
49	Cornell	t.b.d.	2.1	T1: 0x107 T2: 0xe	Shipped 2014/04/14
50	BU	t.b.d.	2.1	T1: 0x107 T2: 0xe	T2 in SN 33
53	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, RARP tested
54	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, 3
55	BU	t.b.d.	2.1	T1: 0x107 T2: 0x1e	Notes: 1, 2
56	BU	USCT	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
57	BU	USCT	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, 3
58	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
59	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
60	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, 3
61	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, 3
62	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
63	BU	HCAL	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
65	BU	t.b.d.	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2
67	BU	t.b.d.	2.2	T1: 0x107 T2: 0x1e	Notes: 4, 1, 2, 3
52	BU	t.b.d.	2.1	T1: 0x107 T2: 0x1d	Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
64	BU	t.b.d.	2.1	T1: 0x107 T2: 0x1d	Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
68	BU	t.b.d.	2.1	T1: 0x107 T2: 0x1d	Note 1; lue indicator does not turn on when handle released (while in crate)
70	BU	t.b.d.	2.1	T1: 0x107 T2: 0x1d	Notes: 1
51	BU	t.b.d.	2.1		Power supply short on T1
69	BU	t.b.d.	2.1		Handle broken
48	CERN (Magnus' lab)

Notes:

1. Initial programming OK (MMC programmed, power supplies OK)
2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
3. Short on C70 fixed (only a few boards have needed this)
4. Front Panel on, prepping for shipment