Difference: AMC13BoardDatabase (106 vs. 107)

Revision 10709 Jul 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 19 to 19
 Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.
Changed:
<
<
Serial No Location Owner MMC Rev Firmware Rev
<-- -->
Sorted ascending
Notes
48 CERN (Magnus' lab)
51 BU t.b.d. 2.1   Power supply short on T1
           
69 BU t.b.d. 2.1   Handle broken
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
64 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming seems to have solved
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
53 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, RARP tested
54 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
56 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU USCT 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
60 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
61 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU HCAL 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
49 Cornell t.b.d. 2.1 T1: 0x107 T2: 0xe Shipped 2014/04/14
50 BU t.b.d. 2.1 T1: 0x107 T2: 0xe T2 in SN 33
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested

Notes:

  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)
  4. Front Panel on, prepping for shipment

>
>
See Database for boards above S/N 48.
  AMC13XG with Kintex-7
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback