Difference: AMC13BoardDatabase (100 vs. 101)

Revision 10114 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.
Line: 23 to 23
 
51 BU t.b.d. 2.1   Power supply short on T1
52 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Board got fried (powered up w/ 3.3V and 12 V power supply shorted)
53 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, 2, RARP tested
Changed:
<
<
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
>
>
54 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
55 BU t.b.d. 2.1 T1: 0x107 T2: 0x1e Notes: 1, 2
Changed:
<
<
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
>
>
56 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
57 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
58 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
59 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
60 BU t.b.d.      
         
Changed:
<
<
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Notes: 1, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
>
>
61 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
62 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
63 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
| 64 | BU | t.b.d. | 2.1 |T1: 0x107 T2: 0x1d | Notes: 1, 2, Programmed, sticky handle, experience problems when programming, reloading+reporgramming
 seems to have solved |
Changed:
<
<
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2
>
>
65 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2
 
66 BU t.b.d. 2.2 T1: 0x200 T2: 0x20 Notes: 1, RARP tested
Changed:
<
<
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 0, 1, 2, 3
>
>
67 BU t.b.d. 2.2 T1: 0x107 T2: 0x1e Notes: 4, 1, 2, 3
 
68 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Note 1; lue indicator does not turn on when handle released (while in crate)
69 BU t.b.d. 2.1   Handle broken
70 BU t.b.d. 2.1 T1: 0x107 T2: 0x1d Notes: 1
Line: 46 to 46
  Notes:
Deleted:
<
<
  1. Front Panel on, prepping for shipment
 
  1. Initial programming OK (MMC programmed, power supplies OK)
  2. Loop-back test OK (Fabric A, B backplane test 12 ports, FCLKA, 4x SFP loop-back test)
  3. Short on C70 fixed (only a few boards have needed this)
Added:
>
>
  1. Front Panel on, prepping for shipment
 
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback