Backlinks to EricHazen in all Webs (Search Main Web only)
Results from Main web retrieved at 22:13 (GMT)
Please log AMC13 test activity below, blog style (new entries at top) 2022 09 06, Chris Cosby Monitoring script running currently to detect when bad states show up...
Conceptual design for a protocol from AMC13 (and others) to CMS DAQ. 2011 05 11 Frans M suggests switch able packets in Ethernet format. This is a good idea in...
23 October 2008 (at Dresden) Chatting with Julie. HCAL 2009 upgrade funds have been doled out as follows: Princeton trial PCB layout of front end board with...
CmsGroup Member list (comma separated list): Set GROUP PhilLawson, DummyUser, TulikaBose, UlrichHeintz, JimRohlf, LarrySulak, ArjanHeering, ArnoHeister...
Eric`s CMS SLHC Page (see page if anything missing). See also CaloElectronicsUpgrades for some discussion of funding. Work in Progress AMC13 Debug Log...
2010 06 16 (Mike) Created a new twiki page for all things to do with ipmitool, dtctool, and the dtc library: DTC Software 2010 05 26 (Mike) The dtc t2 is now...
We are designing a microTCA module called the DTC (DAQ and Timing Card) for the HCAL SLHC readout. It is currently envisioned that this will occupy one of the MCH...
Schematic Feather Schematic for Adafruit Fona Feather (for battery charger, etc) MCP73831 Datasheet LiPo battery manager data from Adafruit CFAL1202A...
How to Program DTC Flash 1. Log on to CMS1 as user daq (usual password, Mega....). 2. Copy the MCH file generated by Xilinx to somewhere on cms1. You can for...
Talking to MicroTCA systems involves a bewildering array of layered software standards. We`re still sorting it all out. Simple Things Which Work Now Talk to MCH...
TWiki Site Statistics Monthly Site Statistics Data Month WebsTotal WebsViewed Websupdated TopicsTotal TopicsViewed TopicsUpdated Attach...
Some thoughts from TWEPP 2009 and other discussions: Test beam 2010 seems to be on still, but with QIE8 FPGA front end board (Tully) Greg/Costas/John/Magnus...
TWiki Administrator Group Member list (comma separated list): Set GROUP PhilLawson, EricHazen, DanielGastler, GuoanHu Persons/group who can change...
List of TWiki users Below is a list of users with accounts. If you want to edit topics or see protected areas of the site then you can get added to the list by...
FirstName LastName Email WikiName LoginName Tulika Bose tulika #64;physics.bu.edu TulikaBose tulika Ulrich Heintz heintz #64;physics.bu.edu...
Report for Bulk Register Registering TulikaBose TulikaBose has been added to the password and user mapping managers Writing topic TulikaBose RegistrationHandler...
Statistics for Main Web Month: Topic views: Topic saves: File uploads: Most popular topic views: Top viewers: Top contributors...
Number of topics: 17
Results from BUCMSPublic web retrieved at 22:13 (GMT)
AMC13 Software Meeting 2013 12 05 Attendance: Eric, Arno We attempted to define more clearly the scope of the project and tasks. First, the project scope:...
The AMC13 register set (and associated uHAL address table) is complex. This page attempts (will attempt!) to document it. The address table files are used for access...
The details of this depend on the facilities available. Generally the possible values we might want to generate alarms on fall into the following categories:...
AMC13 to AMC Backplane Link We have developed firmware to assist AMC module developers in communicating with the AMC13. The current version (as of May 2014) is documented...
Each AMC13 as shipped is a 3 board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed...
AMC13 DAQ Firmware This page is the `home` for documentation of a common firmware developed to suit many users of the AMC13. UpdatedDAQPath.pdf ...
Getting started with new AMC13 software: 1. Install SLC6 OS and Cactus tools on your computer. install Cactus install 2. Check out AMC13 software package and...
Everything on this page is OBSOLETE . See AMC13CppProductionSoftware . This page describes `Legacy` C software for the AMC13. The intention is that new users...
This page describes the production AMC13 C support software. The software is in git here: Current tags: browse AMC13SoftwareHistory $ git clone ssh://git@gitlab...
The following procedures describe the installation process for xDAQ releases for the HCAL Upgrade project. NOTE that the code has been migrated to SVN (instead...
From CMS firmware 0x202 and onward the new event builder seems to be working. Here is an example of how to generate a fake multi block event and unpack it. To initialize...
AMC13 Debugging Hints My AMC13 is plugged in but I can`t contact it! Check sensor info (NAT MCH) If you have an NAT MCH, you can learn a lot about the state of your...
Starting now (Nov 2013) we are working with the trigger and IPBus guys to develop a generic GUI which can meet the following criteria: Render a reasonable display...
Firmware Versions Please see Database for current versions. Any firmware combinations not posted there are not supported! If for some reason your firmware file is...
Proposed new database and versioning system for AMC13 firmware. Version numbers Currently we have many AMC13FirmwareFlavors each with their own range of version...
Please log test activity here: AMC13DebugLog Test Firmware Current AMC13 firmware as of 20 Jan 2012 supports TTC distribution plus demonstration DAQ link transmit...
Here is a summary table of the current AMC13 firmware variants: T1 Version Compatible Hardware Use 0x200 up AMC13XG with XC7K325T FPGA general...
Flash Programming The AMC13 flash memory is divided into 4 regions as follows: NOTE: Table needs to be updated with new firmwares Offset Name File Name...
See also FinalAMC13Discussion page at CERN with collaborators` requests Hardware / Production Front panel labels Assign serial numbers to all boards...
For published AMC13 overviews, see: JINST paper ACES 2014 Poster Clocks There is a quad clock synthesizer (Si5338B) with the following outputs programmed...
Eric, 0x24a has implemented the double buffering of monitor counters. Registers 0x0, 0x3, 0x4, 0x5, 0x2c and 0x30 0x59(resync counter has been moved from bit 31...
Everything here is OBSOLETE. This code will no longer work as the underlying libraries don`t work with IPBus firmware any more. Releases amc13 python noTests...
2014 07 15, hazen Babak complains that he isn`t getting TTC. Using fw 0x109/0x21. Status display looks reasonable (r0 0x55000009 r1 0x01090001) Asked him to...
The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1 3 different type SFP in the upper 3 sites for DAQ. See sketch below. The TTC SFP...
Each AMC13 has a hardware serial number determined by solder jumpers on the T2 board (8 bits 1 9th bit). This number determines the MAC address, and is therefore...
New 2020 Production Test 1. Test Fixture a. Install the module in the green v2 testing board connected to the Lambda power supplies a. Turn on the power supply...
This page describes new (as of early 2015) python bindings to the AMC13 software. This is very much a work in progress, but at least one demo program now works. See...
Active 1. readIPs.py and others should report the host and slot used, and translate the hex to decimal. added 2013 09 16 by esh History 1. Create new module...
Supporting Documents home page /FPGA SPI Interface (new) by T. Gorski 2013 01 31 / FPGA SPI Interface (old) by T. Gorski 2011 03 16 v1p1 Firmware...
AMC13 Rev 2 Block Diagram 15 Rev 2 boards are under test at BU in April 2013. AMC13XG Debug Log PCB Design Information Views handy screen shots...
OBSOLETE This page documents an integrated DAQ link receiver built into the AMC13. For firmware version v 0x10 this works fine using the old `Wu` format DAQ link...
AMC13Tool2 is a command line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode. Usage: AMC13Tool...
These instructions assume you have successfully installed and tested your software. See AMC13CppGettingStarted for instructions if you haven`t Actions...
THIS MANUAL IS INCOMPLETE but what is written here should be more accurate and up to date than the old `functional specification`. Please e mail me if you find mistakes...
2013 05 29 hazen Build MMC v2.1 from tom using default settings in AVR studio 6.1 and flash. Payload power comes on, MMC messages look ok but can`t ping at jumper...
Testing 0x4049 en 1 12 f t lt 1000 10 st Board FED SERIALNO T1 VER T2 REV T2 SERNO INFO...
Bugs Found LINK OK not 1 for all links in fake mode AMC Links AMC01 AMC02 AMC03 AMC04 AMC05 AMC06 AMC07 AMC08 AMC09 AMC10 AMC11 AMC12...
IGNORE THIS PAGE; IT IS OBSOLETE; FOR HISTORICAL INTEREST ONLY Please see AMC13BackplaneLink for current information. Here are some notes on the DAQ interface...
AMC13XG SVN: http://gauss.bu.edu/svn/amc13 hardware/AMC13XG/ Board Revision File Link Notes T1 V0.2 As produced for S/N up to S/N 112 Photos...
This page describes a simple alternative T3 board for the AMC13XG fabricated at Boston for testing G 2 external clock/trigger inputs. Schematic: http://ohm...
AMC13 C Class AMC13Tool Value 0xffffffff can`t be written, e.g. `wv 0x2 0xffffffff` fails with `must be a positive integer` Status Display Maintenance...
To Do 2018 01 25 (djarcaro) The flash programming incorrectly selects an address when the name is slightly off. Example below: Using a FW file called AMC13T2Goldenv0xfff...
A start from Arno, by e mail 2013 12 03: As promised here is the first update about the existence of any software writing guidelines: None from xDAQ, TriggerSupervisor...
We`re starting to think about a successor to AMC13 for ATCA. There have been some complaints about the place holder name `Blade13`. PLEASE SUGGEST new names on this...
Info from Arno, 2013 12 04: Hi again! Ok, here is further info about the Boost Python library: `The Boost Python Library is a framework for interfacing Python and...
Below are the formats for a few useful IPMI commands for the AMC13 as provided by Jes Tikalsky (jtikalsky #64;hep.wisc.edu) with the University of Wisconsin group...
Feb 16 17, 2012 INDICO: https://indico.cern.ch/conferenceDisplay.py?confId 178104 Friday Tentative plan is to develop the system to the block diagram level for...
A workshop was held at Brown on July 15 16 2009. Participants were Marvin Johnson and Ron Lipton (Fermilab); Meenakshi Narain and Ulrich Heintz (Brown); Eric Hazen...
Feb 16 17, 2012 INDICO: https://indico.cern.ch/conferenceDisplay.py?confId 178104 Friday Tentative plan is to develop the system to the block diagram level for...
How to log on to 904 hcal904daq01 is in a brand new, not yet fully configured private network of B 904. To log in you should first log onto lxplus.cern.ch and then...
Charlie`s Acronym List $ ADC: Analog to Digital Converter $ AMC: Advanced Mezzanine Card. An electronics module which mounts in an ATCA or MicroTCA crate...
We have made a design change to the T2 board to improve the timing of the TTC clock vs data. The extracted TTC clock is sent on the MicroTCA clock network (received...
10 Prototype boards with red front panels were manufactured in early 2009. These boards are not identical to the production boards because they have a smaller...
If you see any funny behavior related to a DCC2 during a run, please try to do the following to capture information for debugging: stop the L1A but do not destroy...
Final documentation should be kept on the Countinghouse Page. BU Private TWiki page for DCC2 is HERE. Evolving documentation is on this page of the BU TWiki....
This page contains evolving documenation for the new HCAL VME DCC. It is intended that the latest available versions are kept here during development. DCC2 Hardware...
HTR to DCC2 links use National DS90CR285/286 Channel Link technology. These are in principle 28 bit links but we only use 24 of them. The low level link format is...
The DCC2 is intended to be plug compatible with the DCC1. There are some hardware differences: DCC2 occupies the right slot covered by the front panel, while...
AMC13 0x6052 Testing AMC13 0x24e 0x4049 Testing For all tests below, should check the following: Status display OK Dump all registers using Eric`s...
2009 04 16 Yet another version 14400, this one dated 13 Apr 2009 17:08. Program into HTR in slot 21 top bottom. Cable to DCC1 in slot 19, spigots 0, 1. Reprogramming...
AMC13 (this page) ...
To connect to an HCAL uTCA crate a P5 (as of 2016 04 13): $ ssh lxplus.cern.ch (CERN login) $ ssh cmsusr $ ssh hcalutca01 $ ~hcalsw/bin/AMC13Tool2 wu.sh...
Some ideas on AMC13 HyperDAQ code structure. Currently have amc13::Status with Report() and set/get methods for HTML, BareHTML and LaTeX. Suggest the following...
AMC13 IP and MAC Address Assignment The AMC13 has two PCB Tongues. Tongue 1 (T1) and Tongue 2 (T2) each has their own FPGA (Virtex6/Kintex7 for T1, Spartan6 for T...
This page contains documentation and firmware to provide an Ethernet endpoint for control and readout of devices implemented using FPGAs. The specification and original...
From Jeroen Hegeman on 2013 12 09: Ayayayay... I found the problem. It turns out that in the SLC6 machine the admins installed for me in 904, I had a different ipmitool...
NAT MCH We have an NAT MCH in one of our cates. It is at 192.168.1.41 in our setup. You can telnet to it and you`ll be connected to a command line utility with many...
Links to other useful firmware https://svnweb.cern.ch/trac/cactus/browser/tags/ipbus fw https://svnweb.cern.ch/cern/wsvn/cms firmwsrc/cms tcds/ https...
Summer 2010 SiPM Testing This page contains documentation on testing of various SiPM devices during Summer 2010 at BU. We received a shipment of 3 devices in Feb...
Hi, Attached is the zip file of all manufacturing files. The board has version 0.3 now. The BOM remains the same as before, so not generated this time. Components...
TTC Receiver N.B.: DO NOT USE THE FIRMWARE ON THIS PAGE TO RECEIVE TTC SIGNALS FROM THE AMC13. Use the one available here instead: AMC13BackplaneLink This page documents...
Hardware and Firmware documentation: Webpage TTT Software Packages TTT Software Documentation TTT Software Procedures EricHazen 14 May...
This page is a (temporary) home for a CMS track trigger project, which is currently a collaboration between Fermilab, Brown University and Boston University. Meetings...
Links below for uHTR firmware pages. To check out a specific revision use e.g: $ svn co r 4209 svn ssh://your username@svn.cern.ch/reps/cms firmwsrc/hcal/uhtr/trunk...
This page contains information about work towards integration of the uHTR firmware with the AMC13 link done at BU. It will likely become quickly out of date once...
Number of topics: 75
Site map
BUCMSPublic web
Users
Groups
Index
Search
Changes
Notifications
RSS Feed
Statistics
Preferences
Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback