Backlinks to DavidZou in all Webs (Search Main Web only)

Results from Main web retrieved at 07:46 (GMT)

Please log AMC13 test activity below, blog style (new entries at top) 2016 11 01, Gastler The MCH issues seem to be the netmask on the MCH. Packets sent to them...
CmsGroup Member list (comma separated list): Set GROUP PhilLawson, DummyUser, TulikaBose, UlrichHeintz, JimRohlf, LarrySulak, ArjanHeering, ArnoHeister...
List of TWiki users Below is a list of users with accounts. If you want to edit topics or see protected areas of the site then you can get added to the list by...
Number of topics: 3

Results from BUCMSPublic web retrieved at 07:46 (GMT)

AMC13 Software Restructuring Meeting Minutes: 2013, December 3 Meeting Minutes were taken retroactively, so some details may be inaccurate or missing. Suggesting that...
AMC13 Software Restructuring To Do List To Do: Compare AMC13 and MP7 code and suggest changes to AMC13 code (Dave, Ben) Completed Tasks: Create Software...
AMC13 Software Restructuring Twiki A page for organizing the restructuring of the AMC13 Software To Do List AMC13 Software Restructuring To Do List Reference...
Programming AMC13 Flash with AMC13ToolFlash These instructions are for initial programming of the AMC13 or for recovery of AMC13 after flash has been corrupted. This...
Actions Enable Backplane Read TTC Clock PLEASE NOTE: These are instructions for users who have an understanding of the Building 28 system and of the AMC13Tool...
DTCManager HyperDAQ Pages Point 5 miniDAQ Peek uHBHEa (24) 1102 (20) http://hcalutca01.cms:16612/urn:xdaq application:lid 51/Peek 1104 (21) uHBHEb...
Enable mCTR2 DAQ Path Open mCTR2 tool w/ in uhtr mode (i.e. with option: ` t uhtr`) ./mCTR2tool.exe mCTR2 Board IP address t uhtr Check to see if DAQ Path is enabled...
NAT MCH Firmware Notes by Mark Dobson (copied from CERN Twiki) The majority of NAT MCHs came with firmware version V2.15 which is very buggy. There issues with powering...
High Rates Test Procedure Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely...
This page covers the steps to reprogram the MMC in the AMC13. Software Prerequisites 1 AVR/Atmel Studio (newer versions of MMC may require the use of Atmel Studio...
Sending Data Over the fiber (front) DAQLink Connect the hardware correctly The DAQ Link optical fiber cable should be connected to the second from the...
Number of topics: 11

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback